![]() |
||
|
Special Features of
RACKIT
System 19
|
|
The CD drawer has 9 compartments, 6 holding 12 standard CD jewel boxes each and 3 holding 11 each (total 105 per drawer). Each of these compartments will also hold 7 or 8 MiniDisc jewel boxes (total 69 per drawer). The DVD/VHS drawer has 6 compartments, holding a total of 50 DVDs or 24 VHS videotape cassettes. It will also hold most oversize video cassette storage boxes, and game cartridges. The cassette drawer has 12 compartments, each holding 5 audio cassette tapes (total 60 per drawer). Each compartment will also hold 4 8mm video cassettes, 3 VHS-C cassettes, 9 DAT cassettes, 18 MiniDiscs (or 6 MD jewel boxes), 36 31/2" floppy discs, or various digital memory cards. (In Cassette 19-10, MD jewel boxes and floppy discs fit in bottom drawer only.) The file drawer has rails for standard hanging file folders. It holds either 173/4 inches of letter size folders or 147/8 inches of legal size. Specify your choice when you order. Disc Cabinets - with or without glass door - hold 12-inch LPs or Laser Discs as well as large books. Component Racks hold 19-inch-wide audio and video components, and come in four heights. The open design allows for plenty of cooling air circulation and unobstructed access to wire connections in the back. Setup is easy: simply lower your component into the rack from above, stack the next rack, and so on. Component Racks with Mounting Rails come in three heights and accommodate EIA-Standard 19-inch rack-mount equipment. Dolly or Base: Stack your units on the Dolly for mobility or on the Base for stationary installation. The PC Tower Dolly accommodates a computer tower and workstation. (It is essentially a regular dolly with the addition of a 91/4-inch shelf supported by a fifth caster). Tabletop: Finish each stack off with a Tabletop. It provides a sturdy platform for substantial loads and is always recommended. Modularity: Most units are 15" high. Component Racks are also available in 5, 71/2, 10 and 30"; the two-drawer Cassette unit is 10" high; and the File unit is 25" high. Combining these units affords great flexibility in creating a stack of the desired height. |
![]() |
||||
|
There are 5 different drawer units available: a 10" high unit with 2 Cassette drawers; a 15" high with 3 Cassette drawers; a 15" high with 2 CD or DVD/VHS drawers; and two 25" high units with either 2 hanging-file drawers or with 1 file drawer, 1 CD/DVD/VHS drawer and 1 Cassette drawer. Removable dividers partition the media drawers into compartments holding a number of discs or tape cassettes standing on edge showing the labeled spine. Hanging-file drawers are supplied with your choice of rails for letter or legal size folders. |
|||||
![]() |
|||||
| The drawers are fitted with state-of-the-art full extension ball bearing drawer slides. They feature hold-in detent, which prevents drawer roll-out and bounce-back. Drawers may be removed from the case by activating the disconnect lever on each slide. | |||||
![]() |
|||||
|
Safety clips connect the top unit to unit(s) below it. Reduces risk of "file drawer syndrome"--the tipping of a top unit if more than one drawer is pulled out.
|